Hydro-Flex Hose - Product Specs - Series 800

Series 800

Series 800 High Pressure Hose Braid
Specifying Part Numbers for Series 800 Products

Available in 321 stainless steel hose with 304 stainless steel braid —
other materials on request.
Pressure capability includes full vacuum to pressures shown below
Temperature ratings from cryogenic to 1500ºF
Consult Temperature Correction Table on page 28 for concurrent high temperature/high pressure applications
Meets or exceeds ISO 10380e
Sold only as braided hose

Series 800 — Annular, Stainless Steel, High Pressure Hose and Braid
Nominal Hose Size (in.)	Braid Layers	Nominal Outside Diameter	Minimum Centerline Bend Radius (in.)		Pressure Ratings at 70°F (PSIG)^{^a,b,c,}			Braid Sleeve Crimp O.D.^{^d} (in.)	Weight Per Foot (ft.)
			Static	Dynamic	Max. Working	Max. Test	Nominal Burst
			Static	Dynamic	Max. Working	Max. Test	Nominal Burst
1/4^{^e}	1 2	0.51 0.56	2.25 3	4.5 6	2500 3250	3750 4875	10000 13000	0.58 0.59	0.19 0.30
3/8	1 2	0.67 0.73	3 4	6 8	2625 3250	3938 4875	10500 13000	0.73 0.78	0.31 0.51
1/2	1 2	0.83 0.89	4.5 6	7.5 10	2000 3200	3000 4800	8000 12800	0.90 0.93	0.39 0.63
3/4	1 2	1.16 1.26	6 8	9 12	1525 2625	2288 3938	6100 10500	1.33 1.36	0.59 0.96
1	1 2	1.43 1.54	6.75 9	10.5 14	1375 2050	2063 3075	5500 8200	1.59 1.66	0.73 1.10
1-1/4	1 2	1.87 1.98	4.5 6	13.5 18	1125 1800	1688 2700	4500 7200	1.93 2.00	1.32 2.02
1-1/2	1 2	2.19 2.25	5.25 7	16.5 22	1025 1750	1538 2625	4100 7000	2.25 2.32	1.56 2.55
2	1 2	2.65 2.78	6.75 9	18 24	850 1325	1275 1988	3400 5300	2.71 2.79	1.93 3.14
2-1/2	1 2	3.42 3.53	7.5 10	19.5 26	625 1125	938 1688	2500 4500	— —	2.72 4.23
3	1 2	3.98 4.09	11.25 15	24 32	563 1000	844 1500	2250 4000	— —	3.20 4.72
4	1 2	4.92 5.03	15 20	30 40	363 625	544 938	1450 2500	— —	3.79 5.48
6	1 2	7.12 7.26	22.5 30	45 60	275 413	413 619	1100 1650	— —	7.01 9.57
8	1 2	9.34 9.56	30 40	60 80	200 300	300 450	800 1200	— —	11.38 15.45
a. OmegaFlex hose and corresponding braid must be used in combination to achieve pressure ratings. b. Hose sizes 3/8" through 2" meet ISO 10380 cycle life requirements of 50,000 minimum average cycles at maximum rated working pressure listed above. c. Assemblies in sizes 2-1/2" through 8" must incorporate pullover braid with neck down design to meet listed pressure ratings. Contact OmegaFlex for details on this procedure. d. Braid sleeve must be crimped to the listed braid sleeve crimp O.D. on sizes 2" and below in order to meet pressure ratings. Consult OmegaFlex for details. e. 1/4" meets ISO 10380 cycle life requirements at ISO specified pressure.

Specifying Part Numbers for Series 800 Products