Hydro Flex Hose (Western) Limited
  9624-45 Ave, Edmonton AB T6E 5Y9
  Ph:
(780) 436-9271 Fax: (780) 436-8601

HYDROPAD ACCUMULATOR

Surge Abosorber
Pipeline surges are created by sudden changes in velocity of the liquid flowing in the system. This surging is often called "water hammer", and can result in pressures of many times normal operating pressure. It can be caused by quick closing valves, pump start up or shut down, back surge, and other system effects.

The Hydropad has all stainless steel wetted parts to ensure maintenance-free service and to allow for temperatures and liquids not practical with other units. The Hydropad provides the best performance possible.

The PDF submital sheet can be filled out and faxed to the factory for proper sizing for your application.

Thermal Expansion Compensator
When fluid in a closed system experiences an increase in temperature, the thermal growth of the fluid manifests itself as an increase in pressure. The Hydropad protects against ruptured piping and fittings from this expansion by absorbing the expanded quantity of fluid and limiting the pressure increases.

Use of other devices such as burst disks or pressure relief valves may cause other problems.

The Hydropad has all stainless steel wetted parts to ensure maintenance-free service and to allow for temperatures and liquids not practical with other units. The Hydropad provides the best performance possible.

The PDF submital sheet can be filled out and faxed to the factory for proper sizing for your application.

Pulsation Dampener
Systems that include positive displacement pumps must control the pulsations that result from pump's stroking action. The Hydropad is normally used on process lines to reduce the pressure and flow fluctuations, and also to act as a suction stabilizer.

The Hydropad has all stainless steel wetted parts to ensure maintenance-free service and to allow for temperatures and liquids not practical with other units. The Hydropad provides the best performance possible.

The PDF submital sheet can be filled out and faxed to the factory for proper sizing for your application.


Suction Stabalizer
The cylinders in a pump will starve without suction stabilization, and poor efficiency and premature wear will result.

A Hydropad suction stabilizer is mounted on the inlet side of a pump to eliminate acceleration head and ensures that each cylinder fills. The Hydropad supplies the required force to accelerate the fluid intake at the begining of each stroke.

Supplemental Power
When a hydraulic system needs additional or emergency power, a Hydropad is ideal. Systems using this type of design can greatly increase efficiency and safety.

The Hydropad has all stainless steel wetted parts to ensure maintenance-free service and to allow for temperatures and liquids not practical with other units. The Hydropad provides the best performance possible.

Leakage Makeup
In systems where compensating for leakage is important, the Hydropad accumulator provides a critical reserve of fluid. In these applications, volume losses due to gasket blow-by and valve leakage can be regulated.

The Hydropad has all stainless steel wetted parts to ensure maintenance-free service, and provides the best performance possible.

PRES
(psi)
WT
(lbs)
Gas Capacity
(cu in)
Fluid Displacement
(cu in)
Housing H
(in)
Housing Dia
(in)
Entrance Connection
PRODUCT NO
500 8 16 9 1/2 2 7/8 4 1/2 1/2 MNPT MHY160500
1000 9 16 9 1/2 2 7/8 4 1/2 1/2 MNPT MHY161000
2000 15 16 9 1/2 4 1/2 5 9/16 1/2 MNPT MHY162000
3000 16 16 9 1/2 4 1/4 5 9/16 1/2 MNPT MHY163000
500 13 32 19 5 4 1/2 1/2 MNPT MHY320500
1000 14 32 19 5 4 1/2 1/2 MNPT MHY321000
2000 25 32 19 4 1/4 5 9/16 1/2 MNPT MHY322000
3000 26 32 19 4 1/4 5 9/16 1/2 MNPT MHY323000
200 70 100 60 8 10 1/2 2 MNPT HY11
500 75 100 60 8 10 3/4 2 MNPT HY21
1000 100 100 60 9 10 3/4 1 FLANGE HY31
3000 200 100 60 13 10 3/4 1 FLANGE HY41
200 80 200 120 10 10 1/2 2 MNPT HY12
500 85 200 120 10 10 3/4 2 MNPT HY22
1000 125 200 120 10 10 3/4 1 FLANGE HY32
3000 275 200 120 10 10 3/4 1 FLANGE HY42
200 140 500 300 10 3/4 16 2 MNPT HY13
500 175 500 300 10 3/4 16 2 MNPT HY23
1000 250 500 300 12 16 1 FLANGE HY33
3000 700 500 300 14 3/4 16 1 FLANGE HY43
200 150 1,000 600 14 16 2 MNPT HY14
500 185 1,000 600 14 16 2 MNPT HY24
1000 300 1,000 600 14 16 1 FLANGE HY34
200 300 2,000 1,200 18 24 3 FLANGE HY15
500 450 2,000 1,200 18 24 3 FLANGE HY25
1000 600 2,000 1,200 18 24 1 FLANGE HY35
200 350 5,000 3,000 22 3/4 24 3 FLANGE HY16
500 500 5,000 3,000 22 3/4 24 3 FLANGE HY26
1000 675 5,000 3,000 29 24 1 FLANGE HY36
200 570 10,000 6,000 25 36 4 FLANGE HY17
500 900 10,000 6,000 25 36 4 FLANGE HY27
200 2200 25,000 15,000 40 42 6 FLANGE HY175
500 2500 25,000 16,000 40 42 6 FLANGE HY275
200 3000 50,000 30,000 47 48 6 FLANGE HY18
500 6000 50,000 30,000 47 48 6 FLANGE HY28

Information and Specifications courtesy of  www.flexicraft.com